Памятка
Hi,
I have SPA400 working with trixbox. Try this:
1. Login to SPA400 as Admin
2. Set SPA400 to factory defaults (in the Administration menu)
3. In the Setup menu set static IP address, netmask, gateway, dns, ntp server and timezone.
4. In the SPA9000 Interface set:
- USER ID: 9000 (DON’T CHANGE IT!!!) - everybody changing it to spa400 - I don’t understand why? I telneted to SPA400 and look at the configuration. In my opinion it can’t work if you change it.
5. Set SPA9000 Address to Discover Automatically.
6. In the Voice menu set Preferred Coder
7. Login to trixbox and create trunk.
Trunk Name: spa400 (or whatever you want - this is only a name)
PEER Details:
allow=alaw (or ulaw - it’s depend which Preferred Coder you set in SPA400)
type=peer
user=9000 (it’s USER ID in SPA400)
host=a.b.c.d (ip address your SPA400)
dtmfmode=rfc2833
canreinvite=no
context=from-trunk
insecure=very
Register String:
9000@a.b.c.d/9000
Incoming Settings - leave blank.
Set Inbound and Outbound Routes.
That’s all. I have 2 SPA400 connected to trixbox and incoming and outgoing calls working good.
Good Luck.
Marek Zwierzyk
Загрузка ...